Performance and Characteristics of the Bottle Sterilizer

Performance and characteristics of the bottle sterilizer

Inverted bottle sterilization machine introduction

The inverted bottle sterilizer is mainly used for sterilizing the bottle mouth and the inner wall of the bottle cap without sterilization or high temperature treatment after hot filling of the juice and tea beverage packaged in the PET polyester bottle. This machine mainly consists of conveyor chain system, bottle reverse chain system, frame, bottle flip guide, etc.: This machine realizes automatic turning sterilization and self-reset, and in the sterilization process, it only needs to pass the high temperature of the bottle memory. Sterilize the bottle mouth and the inner wall of the bottle cap without adding any heat source to save energy.

5. This equipment is a vertical flow of aseptic operation platform, an air purification system consisting of a fan, a primary effect, a high efficiency filter and an ozone generator. During operation, the outside air is pre-filtered through the primary filter, and then sent to the high-efficiency filter by the fan to achieve high purity (100 grades) in the operation area. After the Zui is sterilized by the UV lamp and the ozone generator, forming a super in the local Net sterility.

This machine is mainly suitable for sterilizing the gaps between the bottle mouth and the bottle cap which are not contacted by the high temperature material after the hot filling and capping of the tea and juice beverage. The product after filling and capping is automatically turned over by the machine to level the bottle, and the inner wall of the bottle cap is sterilized by the material temperature, and enters the spray cooling machine. The machine adopts the imported transmission chain, which is stable and reliable, and has no damage to the bottle body. The communication speed can be adjusted steplessly.